Miscellaneous Assemblers and Fabricators salary in Charlotte-Concord-Gastonia, NC-SC
Official BLS OEWS May 2025 pay for Miscellaneous Assemblers and Fabricators in the Charlotte-Concord-Gastonia, NC-SC metro area — and the estimated take-home pay on the median wage under 2026 North Carolina tax rules.
The figures
The median Miscellaneous Assemblers and Fabricators in the Charlotte-Concord-Gastonia, NC-SC metro area earns $44,660 a year ($21.47 an hour), according to the BLS OEWS May 2025 estimates (full citation in Sources). The middle half of Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC earn between $37,620 and $50,140 a year. At the ends of the distribution, the lowest-paid 10 percent earn $33,330 or less and the top 10 percent earn $64,720 or more. BLS estimates 13,000 Miscellaneous Assemblers and Fabricators jobs in the Charlotte-Concord-Gastonia, NC-SC area — 9.573 of every 1,000 jobs in the area, a location quotient of 1.06 (above the national concentration). That is 0.9% of all Miscellaneous Assemblers and Fabricators employment in the United States (1,405,030 jobs nationally). By employment, Charlotte-Concord-Gastonia, NC-SC is the #12 largest of the 25 covered metro areas for Miscellaneous Assemblers and Fabricators. In aggregate, Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC earn about $0.60 billion a year (BLS employment multiplied by the mean wage). At the mean wage, the engine's take-home is $38,035.78 a year, so the aggregate take-home of Charlotte-Concord-Gastonia, NC-SC Miscellaneous Assemblers and Fabricators is about $0.49 billion. BLS reports a relative standard error of 3% for this employment estimate. Ranked by median pay, Charlotte-Concord-Gastonia, NC-SC stands #13 of the 25 metro areas covered on this site for Miscellaneous Assemblers and Fabricators. By employment, Miscellaneous Assemblers and Fabricators is the #20 largest of the 30 covered occupations in Charlotte-Concord-Gastonia, NC-SC. Placed against the national distribution for Miscellaneous Assemblers and Fabricators, the Charlotte-Concord-Gastonia, NC-SC median of $44,660 falls between the national median ($44,650) and the national 75th percentile ($51,200). Across all occupations, the Charlotte-Concord-Gastonia, NC-SC median is $49,990 a year — Miscellaneous Assemblers and Fabricators pay is 10.7% below the area's overall median.
Wages in detail
| Wage level | Hourly | Annual |
|---|---|---|
| Mean | $22.25 | $46,290 |
| 10th percentile | $16.03 | $33,330 |
| 25th percentile | $18.09 | $37,620 |
| Median (50th percentile) | $21.47 | $44,660 |
| 75th percentile | $24.11 | $50,140 |
| 90th percentile | $31.11 | $64,720 |
What the wage distribution says
The top 10 percent of Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC earn 1.9 times what the bottom 10 percent earn ($64,720 against $33,330). The middle half spans $12,520 — from $37,620 to $50,140. Hourly, the 90th percentile ($31.11) is 1.94 times the 10th ($16.03). In the upper half of the Charlotte-Concord-Gastonia, NC-SC distribution, the 75th percentile wage of $50,140 takes home $40,975.78 and the 90th percentile wage of $64,720 takes home $52,109.22 — $11,133.44 more net for $14,580 more gross. Against the median take-home of $36,790.84, the top decile keeps 1.42 times as much. The mean wage of $46,290 sits 3.6% above the median: higher-paid Miscellaneous Assemblers and Fabricators pull the average up in Charlotte-Concord-Gastonia, NC-SC. Among the 30 covered occupations in Charlotte-Concord-Gastonia, NC-SC, Miscellaneous Assemblers and Fabricators ranks #18 by median pay. In the Charlotte-Concord-Gastonia, NC-SC wage ladder of covered occupations, Miscellaneous Assemblers and Fabricators sits between Customer Service Representatives at $44,980 and Office Clerks, General at $44,010. Miscellaneous Assemblers and Fabricators accounts for 1.0% of all employment in the Charlotte-Concord-Gastonia, NC-SC metro area. The average covered metro employs 17,062 Miscellaneous Assemblers and Fabricators; Charlotte-Concord-Gastonia, NC-SC employs 0.8 times that.
Take-home pay on the median wage in North Carolina
Single filer, no dependents, no pre-tax contributions, paid biweekly, a full year of W-2 wages in North Carolina; city and local taxes are not included:
| Gross pay (annual) | $44,660.00 |
|---|---|
| Federal income tax | $3,179.20 |
| Social Security (FICA) | $2,768.92 |
| Medicare (FICA) | $647.57 |
| North Carolina income tax | $1,273.21 |
| Total deductions | $7,869.16 |
| Net pay (annual) | $36,790.84 |
| Net pay per biweekly paycheck | $1,415.03 |
| Total deduction rate | 17.62% of gross |
At the median, $36,790.84 of the $44,660 gross is kept ($1,415.03 per paycheck) — a deduction rate of 17.62%. The deduction rate moves with pay: 15.57% at the 10th percentile, 16.49% at the 25th percentile, 18.28% at the 75th percentile, 19.49% at the 90th percentile. Between the 25th and 75th percentile wages, annual take-home rises by $9,560.42 on a gross rise of $12,520.
The same engine at the other published points of the Charlotte-Concord-Gastonia, NC-SC wage distribution:
| Wage point | Net per year | Net per paycheck | Deduction rate |
|---|---|---|---|
| 10th percentile ($33,330) | $28,139.62 | $1,082.29 | 15.57% |
| 25th percentile ($37,620) | $31,415.36 | $1,208.28 | 16.49% |
| Median ($44,660) | $36,790.84 | $1,415.03 | 17.62% |
| 75th percentile ($50,140) | $40,975.78 | $1,575.99 | 18.28% |
| 90th percentile ($64,720) | $52,109.22 | $2,004.20 | 19.49% |
Across the published distribution, take-home pay runs from $28,139.62 a year at the 10th percentile to $52,109.22 at the 90th — a spread of $23,969.60 of net pay inside one occupation and one metro area.
For scale: across all occupations, the Charlotte-Concord-Gastonia, NC-SC median wage of $49,990 takes home $40,860.88 a year ($1,571.57 per paycheck, deduction rate 18.26%). The Miscellaneous Assemblers and Fabricators median take-home of $36,790.84 sits $4,070.04 (below that area-wide figure.
Multi-state metro area. Charlotte-Concord-Gastonia, NC-SC also covers parts of South Carolina. The take-home estimate above uses North Carolina rules — the metro area's primary state. If the job is based in another part of the metro area, the state tax changes: see the South Carolina paycheck calculator.
Run your own numbers
Your own withholding depends on your Form W-4, your benefits and your other income — run your exact figures through the calculator:
Against the national median
Nationally, the median Miscellaneous Assemblers and Fabricators earns $44,650 a year ($21.47 an hour). The Charlotte-Concord-Gastonia, NC-SC median of $44,660 is $10 (0.0%) above the national median.
The means rank the area differently: $46,290 a year in Charlotte-Concord-Gastonia, NC-SC against $46,660 nationally, a gap of $370 (0.8%).
Set against the whole local market, the Miscellaneous Assemblers and Fabricators 90th percentile of $64,720 is 50% of the Charlotte-Concord-Gastonia, NC-SC all-occupations 90th percentile ($130,510), and its 10th percentile of $33,330 is 112% of the area-wide 10th ($29,640).
| Median annual | Median hourly | Mean annual | |
|---|---|---|---|
| Charlotte-Concord-Gastonia, NC-SC | $44,660 | $21.47 | $46,290 |
| United States | $44,650 | $21.47 | $46,660 |
Frequently asked questions
What is the median salary for Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC?
$44,660 a year ($21.47 an hour), per the BLS OEWS May 2025 estimates. The mean is $46,290 a year. Ranked by median pay, Charlotte-Concord-Gastonia, NC-SC stands #13 of the 25 covered metro areas for this occupation.
What is the take-home pay on $44,660 in North Carolina?
About $36,790.84 a year ($1,415.03 per biweekly paycheck) for a single filer with no dependents and no pre-tax contributions, under 2026 rules — a total deduction rate of 17.62% of gross. At the 75th percentile wage of $50,140, take-home is $40,975.78.
How does pay in Charlotte-Concord-Gastonia, NC-SC compare with the national median for Miscellaneous Assemblers and Fabricators?
The Charlotte-Concord-Gastonia, NC-SC median of $44,660 is $10 (0.0%) above the national median of $44,650 a year. At the top of the distribution, the local 90th percentile is $64,720, against a national 90th percentile of $64,880.
How much do the top 10% of Miscellaneous Assemblers and Fabricators earn in Charlotte-Concord-Gastonia, NC-SC?
$64,720 a year or more ($31.11 an hour or more), per the BLS OEWS May 2025 estimates.
What is the take-home pay at the 90th percentile for Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC?
On $64,720 a year, the engine gives a take-home of $52,109.22 a year ($2,004.20 per biweekly paycheck) in North Carolina under the same assumptions — a deduction rate of 19.49%.
How many Miscellaneous Assemblers and Fabricators jobs are there in Charlotte-Concord-Gastonia, NC-SC?
BLS estimates 13,000 Miscellaneous Assemblers and Fabricators jobs in the Charlotte-Concord-Gastonia, NC-SC metro area — 9.573 of every 1,000 jobs in the area.
How concentrated are Miscellaneous Assemblers and Fabricators jobs in Charlotte-Concord-Gastonia, NC-SC?
The location quotient is 1.06 — above the national concentration. A quotient of 1.0 means the occupation's share of local employment equals its national share.
How much does take-home pay vary for Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC?
From $28,139.62 a year at the 10th percentile wage ($33,330) to $52,109.22 at the 90th ($64,720), under the same single-filer assumptions in North Carolina.
What is the total wage bill for Miscellaneous Assemblers and Fabricators in Charlotte-Concord-Gastonia, NC-SC?
About $0.60 billion a year — the BLS employment estimate of 13,000 multiplied by the mean wage of $46,290.
Sources and method
Wage data: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May 2025 estimates (released May 15, 2026), retrieved October 27, 2026 — bls.gov/oes. OEWS figures are survey estimates for May 2025, not job offers. Take-home pay is computed by this site's paycheck engine with 2026 federal and state rules; the method, and what the engine does not model, is documented in the paycheck methodology guide. Estimates only — not tax advice.